Winchester Safes L-6030-26-11-E Manuel d'instructions télécharger pdf (Page 11)

Programming the LA GARD electronic lock 9

Step 1:

Enter the Factory Code of 1 – 2 – 3 – 4 – 5 – 6

and open the door.

Step 2: Programming

IMPORTANT! The following must be done with the door in the open position with your locking

bolts extended.

Please Note: Between each step you have 4 seconds to proceed to the next step

1. Enter in six (6) zeroes. This will put you in programming mode. (You will hear a double beep)

2. Enter in your existing six (6) digit combination. (You will hear a double beep)

3. Enter your new six (6) digit combination. (You will hear a double beep)

4. Enter your new six (6) digit combination again. (You will hear a double beep)

5. Wait approximately 10 seconds and then enter your new combination.

6. If the procedure was executed properly, you will be able to rotate the handle.

7. If the gun safe will not open, the procedure was incorrectly executed and the combination is

still 1 -2 -3 -4 -5 -6. Leave the door open and begin with Step 2.

Entering in the wrong code will result in 3 beeps.

Entering the wrong code 4 times will result in the keypad shutting down for a 5 minute time-out.

The battery must remain connected. Removing the battery will not override the time-out period.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 53 54

Pas de commentaire

Winchester Safes L-6030-26-11-E Manuel d'instructions Page 11